top of page

 

تايل جراوت

الوصف 

ترويبة بلاط عازله للماء تستخدم لحشو وحدات البلاط في حمامات السباحة والاماكن الصناعية .

المميزات

  1. مضادة للماء .

  2. في شكل بودرة اساسها اسمنتي معالج باضافات بوليمرية .

 

مجالات الاستخدام :

  1. مركب عالي الجودة يستخدم لحشو فواصل السيرميك والبلاطات المختلفة .

الخواص :

1 - يتحمل التشقاقات في محيط من 4 – 12 ملي .

2 – مقاومة عالية للماء والخدش مع جميع البلاطات .

3 – توجد في اللون الابيض ومتاح جميع الالوان وبناء على رغبة العميل .

الخواص الفنية :

1 – حجم الحبيبات 30 ميكرون .

2 – الرابط ( اسمنت بورتلاندي ) .

3 – الكثافة 1.2 كيلو  / لتر .

4 – نسبة  خلط الماء ( 28- 35 ) % .

5 – معدل الفرد من ( 0.5 – 1 ) كيلو جرام / م  2 / لتر .

 

طريقة الاستخدام

:

  • إزالة مادة الغراء في الفواصل التي تزيد عن نصف سماكة البلاط

  • تنظيف سطح البلاط من الغبار والمواد العالقة وأي مواد غريبة

  • ترطيب سطح البلاط والفواصل بالرش بالماء النظيف لمعادلة امتصاص الماء مع التأكد من عدم ترك ماء زائد بالفواصل .

  • اخلط كيس (15 كجم ) من العمودي تايل جراوت  إلى (5- 6  )  لتر من الماء النظيف , الخلط باستخدام ماكينة الخلط أو باستخدام الدريل الكهربائي مع ريشة الخلط أو يدوي لمدة( 3-5) دقائق ثم ترك الخليط

ثم يترك الخليط لمدة 10 دقائق ويعاد الخلط مرة أخري (دون إضافة ماء )

  • يتم فرد الترويبة بواسطة السكين المطاطي أو البروة المطاطية باتجاه قطرى علي الفواصل والضغط لملئ الفواصل وتسويتها وإزالة الترويبة الزائدة.

  • تترك الفواصل لتجف لمدة (15-30) دقيقة ( زمن الشك الابتدائي ) اعتمادا علي درجة الحرارة والرطوبة , ثم تنظف باسفنجة مبللة .

  • يتم التنظيف النهائي لسطح البلاط بعد تمام الجفاف باستخدام قطعة قماش جافة

  • يجب معالجة الأسطح التي تم ترويبها بالرش بالماء لمدة يومين للحصول على مقاومة عالية .

  • التوصيات:

  • يجب استخدام الترويبة بعد تمام جفاف طبقة غراء البلاط

  • يجب استخدام خلطة الترويبة في خلال ساعتين من الخلط بالماء

التخزين :

  • يجب تخزين المنتج في مكان جاف ومظلل ويتم استخدامه في خلال 12 شهر من الإنتاج.

التعبيئة :

 

-   كيس  15  كيلو .

Tile adhesive grout

Water proofing tile grout to make filling of swimming pools and industrial tile units

Description :

- Mora Grout is swimming grout, highly water resistance, powdered dry mix, is based on cement which modified specially resins, chemical additives and biocides 9 antifungal materials

Fields of use :

- High quality for filling of ceramic joints and industrial and natural tiles

Advantages :

- prevent cracks on joint (4 – 12) ml

- provide high resistance of water and high adhesion strength with all tiles

-aviable in white color and different color (at required colors)

Technical data :

- Filler: precisely crushed lime stone fractions & maximum grain size 0.3 ml

- Bindertype: Portland cement (ASTMc150)

- Additives: contain fir chemical additives to make best workability best constancy

- Density: 1.2 kg / l (aspowder)

- mixing ratio:(28 – 35) %

 

- consumption rate :

(0.5 – 1) kg / m2/ l  (depend on joint depth & tile thickness)

MIX PREPARATION

 

Mix between 1 and 1.2 liter of water for each 5 kg. of product, leave it resting during 5 or 10 minutes Remove it again before starting to use it. In case of narrower joints (4 – 6 mm) use a more fluid paste.

 

USE INSTRUCTIONS

 

- Joints must be clean, dry and free of cement, grease, etc.

- To refill the joints it has to be at least 48 hours after placing the tiles.

- It is recommended to lightly dampen the joints before proceed to refill it.

- Do not apply at the height of sun, and with very hot surface.

- Refill the joints completely with the paste using a spatula or a rubber trowel, pressing the material.

- Leave the paste harden in the joint till the brightness disappear, it normally happens before 30 minutes, proceed to a first cleaning with a lightly dampen sponge.

- Once it gets hard, remove rests from the surface with a clean and dry cloth.

 

 

Storage:

12 months from production manufacture under suitable conditions and dry

 

 

Packing:

- 15 kg bag

bottom of page